|
Item
|
CE5000-40-CRP
|
CE5000-60
|
CE5000-120
|
| CPU |
32-bit CPU |
| Configuration |
Grit rolling |
| Drive system |
Digital servo |
| Maximum cutting area |
375 mm x 50 m |
603 mm x 50 m |
1213 mm x 50 m |
| Range of guaranteed precision |
356 mm x 2 m*1 |
584 mm x 5 m*1 |
1194 mm x 5 m*1 |
| Compatible media widths |
Minimum: 50 mm
Maximum: 484 mm |
Minimum: 50 mm
Maximum: 712 mm |
Minimum: 85 mm
Maximum: 1346 mm |
| Maximum media thickness |
0.25 mm |
| Maximum cutting speed |
60 cm/s (in all directions) |
100 cm/s (45°direction) |
| Specifiable cutting speeds |
1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s |
1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, * cm/s |
| Cutting force |
0.2-2.9N (20 gf to 300 gf) (31 levels) |
0.2-4.4N (20 gf to 450 gf) (38 levels) |
| Minimum character size |
Approximately 5 mm for alphanumeric characters
(varies depending on the medium, font, etc.) |
| Mechanical resolution |
0.005 mm |
| Programmable resolution |
GP-GL: 0.1/0.05/0.025/0.01 mm; HP-GLTM *2: 0.025 mm |
| Repeatability precision |
0.1 mm or less per 2 m*1 |
| No. of pens mountable |
1 pen |
| Compatible cutter type |
Supersteel cutter blades |
| Compatible pen type |
Water-based fiber-tip pens |
| Compatible cutting film |
Marking film (PVC, fluorescent, or reflective film) up to 0.25 mm in thickness (excluding high-luminosity reflective film) |
| Interfaces |
RS-232C/USB 2.0 (Full Speed) |
| Buffer capacity |
2 MB |
| Command modes |
GP-GL, HP-GLTM *2(selected on the control panel) |
| Display panel |
Liquid crystal display (16 characters x 1 row) |
| Rated power supply |
100 to 240 V AC, 50/60 Hz |
| Power consumption |
100 VA |
| Operating environment |
10°C to 35°C, 35% to 75% RH |
| Conditions for guaranteed precision |
16°C to 32°C, 35% to 70% RH |
External dimensions
(W x D x H)*3 |
Approx. 623 x 285 x 223 mm |
Approx. 851 x 585 x 1004 mm |
Approx. 1,487 x 744 x 1194 mm |
| Weight*3 |
Approx. 9.4 kg |
Approx. 25 kg |
Approx. 40 kg |
